Citation

Tou, T.Y. and Yap, S.S. and Chin, O.H. and Ng, S.W. (2007) Optimization of a Rhodamine 6G-doped PMMA thin-slab laser. Optical Materials, 29 (8). pp. 963-969. ISSN 09253467

Full text not available from this repository.

Abstract

Poly(methyl methacrylate) (PMMA) and Rhodamine 6G (Rh6G) were first dissolved in chloroform, then dried and milled into powdery preform for fabrication into rectangular thin slabs (< 1 mm) by a hot-press molding technique. Aluminum was coated on two surfaces of dye-doped PMMA thin slabs as reflectors. Conversion efficiency, peak lasing wavelength and spectral bandwidth of dye laser emissions from these slabs, which were transversely pumped by a nitrogen laser, were measured as a function of the dye concentration, slab thickness, and aluminum coatings. Re-absorption of back-scattered fluorescence due to aluminum coating on the opposite surface increased the conversion efficiency from 10.5% to 15% while that on the back surface further increased it to 17.5%. The operation lifetime of 3000 pulses at 50% reduction in the dye laser output, as compared to earlier work on thicker slabs (5 mm), suggested that re-absorption of fluorescence did not cause significant photo-degradation of Rh6G. As the dye laser action was confirmed in a thin slab, the operation lifetime may represent a more realistic photostability of Rh6G in PMMA matrix. (c) 2006 Elsevier B.V. All rights reserved.

Item Type:	Article
Subjects:	T Technology > T Technology (General) Q Science > QA Mathematics > QA71-90 Instruments and machines > QA75.5-76.95 Electronic computers. Computer science
Divisions:	Faculty of Engineering and Technology (FET)
Depositing User:	Ms Suzilawati Abu Samah
Date Deposited:	29 Sep 2011 03:44
Last Modified:	29 Sep 2011 03:44
URII:	http://shdl.mmu.edu.my/id/eprint/3074

Downloads

Edit (login required)