Citation

Ehtesham, Alborz and Wong, Wei Wen and Wong, Hin Yong and Zaman, Mukter (2016) Recent Advances in Fabrication Techniques of Perovskite Solar Cells: A Review. American Journal of Applied Sciences, 13 (11). pp. 1290-1314. ISSN 1554-3641

Text ajassp.2016.1290.1314.pdf Restricted to Repository staff only Download (1MB)

Abstract

In this study, thorough review is performed on various reported fabrication techniques of the Perovskite Solar Cell (PSC) and the Hole Transport Materials (HTM) layer, in order to provide a critical insight on the direction for further advancement in related fields as well as a better understanding on the device physics. So far, the best short-circuit current density of 22.9 mA/cm2 has been reported in CH3NH3PbI3-xClx scaffold by TiCl4 nanorods treated by NRS and the best open circuit voltage of 0.763V has been reported in TiO2/perovskite/spiro-OMeTAD/Au. On the other hand, so far the highest PCE of the PSCs reported in the literature is 19.3%. Interestingly, PSC with 200nm mesoporous TiO2 has been reported to achieve PCE value of 16.46%. A 5-layer TiO2/perovskite/spiro-OMeTAD/Au integrated with 40 nm ZnO thin film has been reported to achieve Fill Factor (FF) of 76%. Although promising data has been obtained through numerous researches, there are still many other optimizations yet to be done before mass commercialization of PSC is possible. Optimizing the fabrication process of carrier transport material as well as the incorporation of sensitizer into the device structure are the key aspects that should be focused on in future researches.

Item Type:	Article
Uncontrolled Keywords:	Perovskite, Solar Cell, Fabrication, Efficiency, Influence Effect, Replicable Energies
Subjects:	T Technology > TA Engineering (General). Civil engineering (General)
Divisions:	Faculty of Engineering (FOE)
Depositing User:	Ms Suzilawati Abu Samah
Date Deposited:	01 Feb 2017 05:27
Last Modified:	01 Feb 2017 05:27
URII:	http://shdl.mmu.edu.my/id/eprint/6391

Downloads

Edit (login required)