Citation
Malek, Ali and Projjal, Basu and Marwa, Liwa and M. I. Fadhel, and M. Souiyah, and Basem, Abu Ziend (2013) Comparison Between the Properties of Al-TiC and Al-(TiC+Fe3C+Fe2Ti+Fe) Composites. Arabian Journal for Science and Engineering, 38 (10). pp. 2785-2791. ISSN 1319-8025 Full text not available from this repository.Abstract
This paper aims to study the efficacy of (TiC+Fe3C+Fe2Ti+Fe) powder mixture produced by a new synthesis technique utilizing a cheap source of Fe-Ti and C (in terms of wear resistance and hardness). The powder product was used as reinforcement in Al matrix. Composites were produced by mixing 20 wt% of the reinforcing powder and 80 wt% of Al followed by 10 ton cold pressing and sintering for 2 h at 500 A degrees C. The composites reinforced with the synthesized powders were compared with the composites produced using pure TiC as reinforcement material. Wear rate and hardness of composites using synthesized TiC mixture as the reinforcement material were found to be very close to that produced with pure TiC. The results of wear and hardness thus confirm that the synthesized powders containing TiC, Fe3C, Fe2Ti, and Fe can replace pure TiC in aluminum matrix composite applications.
Item Type: | Article |
---|---|
Subjects: | Q Science > Q Science (General) |
Divisions: | Faculty of Engineering and Technology (FET) |
Depositing User: | Ms Suzilawati Abu Samah |
Date Deposited: | 23 Oct 2013 02:58 |
Last Modified: | 23 Oct 2013 02:58 |
URII: | http://shdl.mmu.edu.my/id/eprint/4297 |
Downloads
Downloads per month over past year
Edit (login required) |