All-optical wavelength conversion based on cross-phase modulation (XPM) in a single-mode fiber and a Mach-Zehnder interferometer

Citation

Sarker, B.C. and Yoshino, T. and Majumder, S.P. (2002) All-optical wavelength conversion based on cross-phase modulation (XPM) in a single-mode fiber and a Mach-Zehnder interferometer. IEEE Photonics Technology Letters, 14 (3). pp. 340-342. ISSN 10411135

[img] PDF
1903.pdf

Download (0B)

Abstract

An all-optical wavelength converter based on cross-phase modulation in a single-mode fiber (SMF) and a Mach-Zehnder interferometer followed by a Fabry-Perot filter is analyzed. The performance results evaluated at a bit rate of 10 Gb/s with normal and dispersion-shifted fiber (DSF) with optical filtering show that wavelength conversion is possible,without significant reduction in conversion efficiency over a wavelength separation of approximately 10 nm between the input pump-and-probe signals. For pump-and-probe input powers of 10 mW each, the output converted power is found to be -6.5 dBm for normal fiber corresponding to zero wavelength separation and the corresponding output power for wavelength separation of 2 nm is -11 dBm. It is also found that DSF converter provides higher efficiency and output power compared to conventional SMF.

Item Type: Article
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: Faculty of Engineering (FOE)
Depositing User: Ms Rosnani Abd Wahab
Date Deposited: 25 Aug 2011 03:07
Last Modified: 25 Aug 2011 03:07
URII: http://shdl.mmu.edu.my/id/eprint/2644

Downloads

Downloads per month over past year

View ItemEdit (login required)