Citation

Yahya, Salah I. and Zubir, Farid and Abdel Hafez, Mohammed and Nkenyereye, Lewis and Chaudhary, Muhammad Akmal and Assaad, Maher and Nouri, Leila and Rezaei, Abbas and Md Jizat, Noorlindawaty (2024) Design and fabrication of a microstrip triplexer with wide flat channels for multi-band 5G applications. PLOS ONE, 19 (5). e0302634. ISSN 1932-6203

Full text not available from this repository.

Abstract

In this paper, a new microstrip triplexer is designed to work at 2.5 GHz, 4.4 GHz and 6 GHz for mid-band 5G applications. All channels are flat with three low group delays (GDs) of 0.84 ns, 0.75 ns and 0.49 ns, respectively. Compared to the previously reported works, the proposed triplexer has the minimum group delay. The designed triplexer has 18.2%, 13.7%, 23.6% fractional bandwidths (FBW%) at 2.5 GHz, 4.4 GHz and 6 GHz, respectively. The obtained insertion losses (ILs) are low at all channels. These features are obtained without a noticeable increase in the overall size. A novel and simple resonator is used to design the proposed triplexer, which includes two pairs of coupled lines combined with a shunt stub. A perfect mathematical analysis is performed to find the resonator behavior and the layout optimization. The type of shunt stub is determined mathematically. Also, the smallness or largeness of some important physical dimensions is determined using the proposed mathematical analysis. Finally, the designed triplexer is fabricated and measured, where the measurement results verify the simulations.

Item Type:	Article
Uncontrolled Keywords:	5G
Subjects:	T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK5101-6720 Telecommunication. Including telegraphy, telephone, radio, radar, television
Divisions:	Faculty of Engineering (FOE)
Depositing User:	Ms Nurul Iqtiani Ahmad
Date Deposited:	28 May 2024 09:02
Last Modified:	28 May 2024 09:02
URII:	http://shdl.mmu.edu.my/id/eprint/12460

Downloads

Edit (login required)