The measurement of mechanical parameters of a switched reluctance motor drive system

Gobbi, R. and Sahoo, N. C. and Vejian, R. (2007) The measurement of mechanical parameters of a switched reluctance motor drive system. Measurement Science and Technology, 18 (11). pp. 3636-3644. ISSN 0957-0233

Full text not available from this repository.
Official URL: http://dx.doi.org/10.1088/0957-0233/18/11/049

Abstract

The switched reluctance motor has been receiving attention recently after the availability of power electronics devices, for its robustness, simple construction and a high torque/mass ratio. The electromagnetic characteristic measurement for the motor has been widely researched and reported despite nonlinear behavior of the motor. The electromagnetic characteristic data are being used as look-up tables for modeling and simulation purposes. However, for dynamic simulation, mechanical parameters such as friction coefficients and moment of inertia are equally important. There has not been much work done to measure the parameters as mostly they are provided by the manufacturer of mechanical parts ( the motor etc) which are not accurate for the entire mechanical system, when they are coupled. A few measurement methods have been used widely to measure the mechanical parameters but the important friction constants such as Coulomb friction constant were neglected. This paper introduces a new technique which was derived from the classical viscous plus Coulomb friction model for all the mechanical parameter measurements including the Coulomb friction. The results obtained were verified using experimental data.

Item Type: Article
Subjects: T Technology > T Technology (General)
Q Science > QA Mathematics > QA75.5-76.95 Electronic computers. Computer science
Divisions: Faculty of Engineering and Technology (FET)
Depositing User: Ms Suzilawati Abu Samah
Date Deposited: 26 Sep 2011 02:50
Last Modified: 25 Sep 2013 02:20
URI: http://shdl.mmu.edu.my/id/eprint/2987

Actions (login required)

View Item View Item