Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis

Citation

Farid, A. Akhavan and Jahanbakhsh, M. and Lotfi, Mohammad (2016) Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis. Tribology International, 99. pp. 107-116. ISSN 0301-679X

[img] Text
Wear estimation of ceramic and coated carbide tools in turning of Inconel 625 3D FE analysis.pdf - Draft Version
Restricted to Repository staff only

Download (4MB)

Abstract

Examination of cutting tool wear by experimental approaches is too costly. The main objective of this work is to develop an accurate 3D finite element model to predict the tool wear of PVD-TiAlN coated carbide and ceramic inserts in turning of Inconel 625. Thus, the cutting tools with complex geometries are modeled. Usui wear rate model is used to estimate wear rate where its constant parameters are achieved based on the cutting tools and workpiece material. The verification tests showed that the predicted values are in good agreement with the experiments. Moreover, among the cutting parameters, the increase of depth of cut were found as the most effective factor on the generation of temperature and stresses on the tool faces.

Item Type: Article
Uncontrolled Keywords: Machining; Wear; Ceramic; Finite-element method
Subjects: T Technology > TJ Mechanical Engineering and Machinery
Divisions: Faculty of Engineering and Technology (FET)
Depositing User: Ms Nurul Iqtiani Ahmad
Date Deposited: 28 Jul 2016 11:30
Last Modified: 28 Jul 2016 11:30
URII: http://shdl.mmu.edu.my/id/eprint/6350

Downloads

Downloads per month over past year

View ItemEdit (login required)