Items where Subject is "TA401-492 Materials of engineering and construction. Mechanics of materials"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | C | E | I | J | K | L | M | N | R | S | W | Y
Number of items at this level: 29.

A

Au, Benedict Wen Cheun and Chan, Kah Yoong (2017) Sodium and potassium doped P-type ZnO films by sol-gel spin-coating technique. Applied Physics A, 123 (7). ISSN 0947-8396

C

Chockalingam, Palanisamy (2013) The grindability of glass fibre reinforced polymer composite. PhD thesis, Multimedia University.

Chockalingam, Palanisamy and Kok, Chee Kuang (2016) Effect of grinding process parameters on surface area roughness of glass fibre reinforced composite laminate under dry and coolant environment. International Journal of Engineering and Technology (IJET), 8 (2). pp. 1295-1301. ISSN 0975-4024

E

Elmobarak, Husameldin A. and Rahim, Sharul K. A. and Abedian, Mohammad and Soh, Ping Jack and Vandenbosch, Guy A. E. and Lo, Yew Chiong (2017) Assessment of multilayered graphene technology for flexible antennas at microwave frequencies. Microwave and Optical Technology Letters, 59 (10). pp. 2604-2610. ISSN 0895-2477

I

Islam, M. A. and Rahman, K. S. and Sobayel, K. and Enam, T. and Ali, A. M. and Zaman, Mukter and Akhtaruzzaman, M. and Amin, N. (2017) Fabrication of high efficiency sputtered CdS:O/CdTe thin film solar cells from window/absorber layer growth optimization in magnetron sputtering. Solar Energy Materials and Solar Cells, 172. pp. 384-393. ISSN 0927-0248

J

Jahanbakhsh, M. and Akhavan Farid, A. and Lotfi, Mohammad (2018) Optimal flank wear in turning of Inconel 625 super-alloy using ceramic tool. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (2). pp. 208-216. ISSN 0954-4054

Johar, Mahzan and Israr, H. A. and Wong, King Jye and Low, Kean Ong (2018) Mode I and mode II delamination of a chopped strand mat E-glass reinforced vinyl ester composite. Plastics, Rubber and Composites, 47 (9). pp. 391-397. ISSN 1465-8011

Johar, Mahzan and Israr, Haris Ahmad and Low, Kean Ong and Wong, King Jye (2017) Numerical simulation methodology for mode II delamination of quasi-isotropic quasi-homogeneous composite laminates. Journal of Composite Materials, 51 (28). pp. 3955-3968. ISSN 0021-9983

K

Krishnasamy, Jegenathan (2011) Fabrication and characterisation of magnetron sputtered copper thin films. Masters thesis, Multimedia University.

L

Lau, K. Y. and Ng, E. K. and Abu Bakar, M. H. and Abas, A. F. and Alresheedi, M. T. and Yusoff, Zulfadzli and Mahdi, M. A. (2018) Low threshold L-band mode-locked ultrafast fiber laser assisted by microfiber-based carbon nanotube saturable absorber. Optics Communications, 413. pp. 249-254. ISSN 0030-4018

Lau, K. Y. and Ng, E. K. and Abu Bakar, M. H. and Abas, A. F. and Alresheedi, M. T. and Yusoff, Zulfadzli and Mahdi, M. A. (2018) Low threshold linear cavity mode-locked fiber laser using microfiber-based carbon nanotube saturable absorber. Optics & Laser Technology, 102. pp. 240-246. ISSN 00303992

Liew, Kia Wai and Kok, Chee Kuang and Mhd Noor, Ervina Efzan (2016) Effect of EDM dimple geometry on friction reduction under boundary and mixed lubrication. Tribology International, 101. pp. 1-9. ISSN 0301-679X

Lim, Thong Leng and Chang, Robin Yee Hui and Yoon, Tiem Leong and Koh, Pin Wai (2019) The generation of ground‐state structures and electronic properties of ternary Alk Til Nim clusters (k  + l  + m  = 4) from a two‐stage density functional theory global searching approach. International Journal of Quantum Chemistry, 119 (10). e25884. ISSN 0020-7608

M

Mat Hussin, Mohd Rofei and Ramli, Muhammad Mahyiddin and Wan Sabli, Sharaifah Kamariah and Md Nasir, Iskhandar and Syono, Mohd Ismahadi and Wong, Hin Yong and Uz-Zaman, A.S. M. Mukter (2017) Fabrication and Characterization of Graphene-on-Silicon Schottky Diode for Advanced Power Electronic Design. Sains Malaysiana, 46 (7). pp. 1147-1154. ISSN 0126-6039

Mhd Noor, Ervina Efzan and Mhd Nasir, Nur Faziera and Idris, Siti Rabiatul Aisya (2016) A review: lead free solder and its wettability properties. Soldering & Surface Mount Technology, 28 (3). pp. 125-132. ISSN 0954-0911

Mhd Noor, Ervina Efzan and N., Siti Syazwani (2018) A Review on Effect of Nanoreinforcement on Mechanical Properties of Polymer Nanocomposites. Solid State Phenomena, 280. pp. 284-293. ISSN 1662-9779

Mhd Noor, Ervina Efzan and N., Siti Syazwani and A. M., Mustafa Al Bakri and Liew, Kia Wai (2021) Microstructure and X-Ray Diffraction Analysis of Aluminum-Fly Ash Composites Produced by Compocasting Method. Journal of Testing and Evaluation, 49 (2). pp. 1053-1063. ISSN 0090-3973

Mhd Noor, Ervina Efzan and Nordin, Siti Syazwani and Emerson Raja, Joseph (2016) Properties of Aluminum Matrix Composite (AMCs) for Electronic Packaging. Materials Science Forum, 857. pp. 18-21. ISSN 1662-9752

Mhd Noor, Ervina Efzan and Zuhailawati, H. and Radzali, Othman (2016) Low temperature In–Bi–Zn solder alloy on copper substrate. Journal of Materials Science: Materials in Electronics, 27 (2). pp. 1408-1415. ISSN 0957-4522; eISSN: 1573-482X

Mohamad Omar, Nasr Yousef and Mat Sharif, Khairul A. and Zulkifli, Mohd Imran and Sin, Y K and Muhd Yassin, S. Z. and Abdul Rashid, Hairul Azhar and Tamchek, N. (2018) Highly Tm Doped Silica Optical Preform by MCVD - Chelate Vapor Delivery (Soot-Dopant Stepwise Technique). Key Engineering Materials, 780. pp. 57-61. ISSN 1013-9826

N

Nirmal, Umar and Hashim, Jamil and Megat Ahmad, M. M. H. and Yuhazri, M. Y. (2018) Surface Roughness Analysis of Stainless Steel Counterface (AISI-304) Subjected to Treated Betelnut Fiber–Reinforced Polyester (T-BFRP) Composites Aged in Different Solutions with Different Kinematic Viscosity. Materials Performance and Characterization, 7 (3). p. 20170085. ISSN 23791365

R

Roodan, Venoos Amiri and Hosseinpour, Niloofar and Zaman, Mukter (2017) Electrochemical Properties of Electrodeposited Reduced Graphene Oxide and Carbon Nanotubes. Journal of Nanoscience and Nanotechnology, 17 (4). pp. 2493-2502. ISSN 1533-4880

S

Segar Singh, Amares Singh Gill (2015) Influence of Alumina and Titanium Dioxide Nanoparticles Reinforcement on Sn-3.0ag-0.5cu and Sn-58bi Solder Alloys. Masters thesis, Multimedia University.

Singh, Ajay Kumar (2018) An analytical analysis of quantum capacitance in nano-scale single-wall carbon nano tube field effect transistor (CNTFET). International Journal of Nanoelectronics and Materials, 11 (3). pp. 249-262. ISSN 1985-5761

Singh, Amares and Mhd Noor, Ervina Efzan and Durairaj, Rajkumar and Lee, Kong Chian (2018) Reliability study of lead free Sn-3.8Ag-0.7Cu and copper (Cu) substrate based on the microstructure, physical and mechanical properties. Journal of Mechanical Engineering and Sciences, 5 (2). pp. 169-180. ISSN 1823- 5514, 2550-164X

Sivagurunathan, Rubentheran and Lau Tze Way, Saijod and Sivagurunathan, Linkesvaran and Yaakob, Mohd Yuhazri (2018) The Effects of Triggering Mechanisms on the Energy Absorption Capability of Circular Jute/Epoxy Composite Tubes under Quasi-Static Axial Loading. Applied Composite Materials, 25 (6). pp. 1401-1417. ISSN 0929-189X

Sivagurunathan, Rubentheran and Way, Saijod Lau Tze and Sivagurunathan, Linkesvaran and Yaakob, Mohd Yuhazri (2018) Effects of triggering mechanisms on the crashworthiness characteristics of square woven jute/epoxy composite tubes. Journal of Reinforced Plastics and Composites, 37 (12). pp. 824-840. ISSN 0731-6844

W

Wong, King Jye and Low, Kean Ong and Israr, Haris Ahmad (2017) Impact resistance of short bamboo fibre reinforced polyester concretes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (8). pp. 683-692. ISSN 1464-4207

Y

Yuhazri, M. Y. and Amirhafizan, M. H. and Nilson, G. C. H. and Sihombing, H. and Kamarul, A. M. and Nirmal, Umar (2018) Effects of gelcoat thickness on mechanical properties of woven glass/polyester laminated composite. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3370-3386. ISSN 2289-4659, 2231-8380

This list was generated on Sun Apr 18 08:06:09 2021 +08.